Monthly Archives: February 2016

CCNP TSHOOT

1. Which of the following steps is not part of the simplified troubleshooting flow?

Question 1 of 50

2. What is this method of troubleshooting called?

 

divide_conquer

 

Question 2 of 50

3. Which is not a well known network maintenance model?

Question 3 of 50

4. Which components are part of a set of network documentation?

Question 4 of 50

5. Which of the following commands backs up the startup configuration to an FTP server using the username lab and the password cisco?

Question 5 of 50

6. Considering the output below, how is the archive feature configured?

 

archive

 

Question 6 of 50

7. Which of the following describes the correct security levels/name associations?

 

security_levels

 

Question 7 of 50

8. Considering the trimmed output, what is the configuration of the logging feature that is applied to the router?

 

logging

 

Question 8 of 50

9. What are some characteristics of SNMP?

Question 9 of 50

10. What are some of the characteristics of NetFlow?

Question 10 of 50

11. What is the correct configuration to enable a router to send SNMP traps to a monitoring server using version 2c and the community cisco?

 

snmp_trap

 

Question 11 of 50

12. You want to ensure that ICMP echo packets are not fragmented by the intermediary devices when you are checking the connectivity for a host. What ping option do you need to use?

Question 12 of 50

13. If a ping is successful, which layers of the OSI model are confirmed to be functioning as they should?

Question 13 of 50

14. What command returns this output:

 

Type escape sequence to abort.
Tracing the route to 10.10.23.3
VRF info: (vrf in name/id, vrf out name/id)
1 10.10.12.2 3 msec 2 msec 1 msec
2 10.10.23.3 4 msec *  5 msec

 

Question 14 of 50

15. Which of the following commands provide detailed information about a router or switch hardware platform?

Question 15 of 50

16. What feature instructs a switch to send copies of packets seen on one port (or one VLAN) to another port where a packet capturing device is connected?

Question 16 of 50

17. Which set of commands produce the following output on a Catalyst switch?

 

span

 

Question 17 of 50

18. What is the keyword that needs to be used under vlan configuration hierarchy to create a RSPAN vlan?

Question 18 of 50

19. Based on the below output, which statements are correct?

 

cdp

 

Question 19 of 50

20. Which of the following statements are true based on the output below?

 

show_version

 

Question 20 of 50

21. You see the following output. What might be a possible cause for the counter UnderSize increasing?

 

under_size

 

Question 21 of 50

22. What command do you need to use to see the errors counters on an interface on a Catalyst switch?

Question 22 of 50

23. Based on the output below, which of the following statement is incorrect?

 

tcam_utilisation

 

Question 23 of 50

24. What are some of the processes that commonly cause excessive CPU utilization?

Question 24 of 50

25. Which statements are true about TCP Timer process?

Question 25 of 50

26. Considering the diagram and the output below, why isn’t the link between the two switches coming up?

 

encap_mis

 

Question 26 of 50

27. Considering the below diagram and output, what statement is true?

 

neg_miss

 

Question 27 of 50

28. You see the following output. Why do you see n-isl?

 

SWITCH-2#show interfaces trunk

Port        Mode             Encapsulation  Status        Native vlan
Gi1/0/2     desirable        n-isl          trunking      1

Question 28 of 50

29. Considering the following diagram and output, which statements are true?

 

domain_miss

 

Question 29 of 50

30. Considering the below output and diagram, which statements are false?

 

domain_miss

 

Question 30 of 50

31. Considering the diagram and output below, why can a host connected on SWITCH-1 in VLAN 100 not ping a host connected on SWITCH-2 in VLAN 100?

 

allowed_vlan

 

Question 31 of 50

32. The port allows VLAN 400 on the trunk link, but for some reasons, a host connected on SWITCH-1 cannot reach another host connected on SWITCH-2 in VLAN 400. Based on the configuration of the port on SWITCH-2 and the output shown, what is the problem?

 

missing_vlan

 

Question 32 of 50

33. You are adding a previously used switch into the network and once the VTP parameters are configured, you notice that the other switches from the network have the VLANs that were configured on the newly added switch. What could be the reason for this?

Question 33 of 50

34. The two hosts cannot communicate in VLAN 400. SWITCH-1 should inform other switches what VLANs are available in the network through VTP messages. After a basic troubleshooting, you find out that VLAN 400 is not created on SWITCH-2. Based on the below output, what seems to be the problem?

 

vtp_mode_mis

 

Question 34 of 50

35. What could be the reasons why VTP might not be sharing VLAN configuration with other switches?

Question 35 of 50

36. Why would a switch not forward a VTP message that it receives?

Question 36 of 50

37. What rules are true with regards to MSTP configuration?

Question 37 of 50

38. Considering the diagram and output below, why is there no communication between PC-1 and PC-2?

 

vlan_missing

 

Question 38 of 50

39. The PortChannel interface between the two switches is not coming up. Based on the diagram and the output shown, what is the reason for this?

 

lacp_passive

 

Question 39 of 50

40. The PortChannel interface between the two switches is not coming up. Based on the below diagram and output, why is this happening?

pagp_auto

 

Question 40 of 50

41. Considering the diagram and output below, why can't SWITCH-1 ping SWITCH-2 in VLAN 100?

 

inconsistent_root

 

Question 41 of 50

42. Considering the diagram and output below, why can't SWITCH-1 ping SWITCH-2 in VLAN 100?

 

inconsistent_bpdu

 

Question 42 of 50

43. Considering the output and the correct diagram below, why can't the two hosts reach each other?

 

ros_wrong_access

 

Question 43 of 50

44. Considering the output and the correct diagram below, why can't the two hosts reach each other?

 

Untitled Diagram

 

Question 44 of 50

45. Based on the diagram and output below, what has happened on e0/0 interface?

 

ps_2

 

Question 45 of 50

46. Based on the diagram and output below, which statement is true?

 

ps_3

 

Question 46 of 50

47. Look at the output below. What do you need to do to bring back up e0/0 interface?

 

SWITCH-3#show  interfaces e0/0
Ethernet0/0 is down, line protocol is down (err-disabled)

Question 47 of 50

48. What command configures DHCP Snooping for VLAN 100?

Question 48 of 50

49. What statements are true about protected ports?

Question 49 of 50

50. Which of the following rules related to Private VLAN are true?

Question 50 of 50